Setting The Date And Time; Inserting And Removing Sd Cards; Inserting The Card; Removing The Card - Tascam DR-701D Reference Manual

Setting the date and time

Using its internal clock, this unit includes the date and time
when a file is recorded.
1. Select the item on the
DATE/TIME
open the screen. (see "Menu operation
DATE/TIME
procedures" on page 12)
2. Turn the DATA dial to change a value, and press the DATA
dial to confirm it and move the cursor to the next item.
After you change the year, month, day, hour, minute and
second in order, the cursor will return to the year.
3. Press the MENU button to confirm the change and return to
the Menu Screen.
NOTE
You can set the unit to automatically add the date set here
to file names.(see "Setting the file name format" on page
36)

Inserting and removing SD cards

Inserting the card

1. Open the front cover.
2. Insert an SD Card into the slot as shown in the illustration
until it clicks into place.
page to
SYSTEM
3 – Preparation

Removing the card

1. Open the front cover.
2. Press the SD card in gently and then release it to allow it to
come out.
CAUTION
• Do not remove the SD card from the unit during recording,
playback or at other times when it is being accessed.
• Do not remove the SD card from the unit when it is
connected to a computer by USB.
• SD cards that meet SD, SDHC or SDXC standards can be used
with this unit.
• A list of SD cards that have been confirmed to work with
this unit can be found on the TEAC Global Site (http://
teac-global.com).

SD card write protection switches

SD cards have protection switches that prevent writing new
data to them.
If you slide the protect switch to the LOCK position, file
recording and editing will not be possible. Move the switch to
the unlocked position in order to record, erase and otherwise
edit data on the card.
Writable Write-protected
15
TASCAM DR-701D