Creating And Changeover To A New File During Continued Recording (Track Incrementing); Manual Track Incrementation During Recording - Tascam DR-05 Owner's Manual

Linear pcm recorder
Hide thumbs Also See for DR-05:
Table of Contents

Advertisement

NOTE
To avoid accidental recording of the noise from pressing the
RECORD [º] button, the start of recording is delayed by 0.3
second (fixed) after the RECORD [º] button is pressed. (REC
DELAY)
CAUTION
Noise may occur when recording with a microphone if the unit
is too close to the AC adaptor. In such a case, keep sufficient
distance between the AC adaptor and the unit.
Creating and changeover to a new
file during continued recording
(Track incrementing)
You can manually or automatically split
a recording by creating a new file. (Track
incrementing)
Manual track incrementation during
recording
You can manually split a recording by creating a
new file.
1 Press the QUICK button while recording.
NOTE
When new files are created, incremental numbers are added
to the end of each file name.
CAUTION
A new file cannot be created if the total number of files
and folders would exceed 5000.
Files shorter than two seconds cannot be created.
If the name of a newly created file would be the same as
that of an existing file, the number will be incremented
until the new file has a unique name.
4–Recording
53
TASCAM DR-05

Advertisement

Table of Contents
loading

Table of Contents