Inserting And Removing Microsd Cards; Inserting The Microsd Card - Tascam DR-05 Owner's Manual

Linear pcm recorder
Hide thumbs Also See for DR-05:
Table of Contents

Advertisement

NOTE
You can set the unit to automatically add the date to file
names. (See "Setting the format of file names" on page 97.)
CAUTION
The date and time setting can only be maintained for a few
minutes if the unit is not powered from batteries or through
the AC adaptor TASCAM PS-P515U or the USB cable. When
using batteries, replace them before they completely lose
power.
Inserting and removing microSD
cards

Inserting the microSD card

NOTE
A microSD card is already installed when the unit is shipped
from the factory. If you want to use this card to record and
play tracks, there is no need to reinstall it.
1 Open the microSD slot cover on the right
side panel.
2 Insert the microSD Card into the slot as
shown in the following illustration until it
clicks into place.
3–Preparation
TASCAM DR-05
39

Advertisement

Table of Contents
loading

Table of Contents