Tascam DR-05 Owner's Manual page 44

4–Recording
5 Use the + or – button to select
press the ¯ or Á button.
The procedure to select the creation of a
stereo or mono file is as follows.
Use the + or – button to select
(default) or .
MONO
If is selected, a mono file is created, and
MONO
the same signals are sent to both L and R level
meters and output channels.
If sound is recorded in
the file size will be half that recorded in
, allowing long time recording.
STEREO
6 Press the  button to show settings.
44
TASCAM DR-05
, and
TYPE
STEREO
in WAV format,
MONO
7 Use the + or – button to select
press the ¯ or Á button.
Set the sampling frequency with the + or −
button to one of the following options.
(default),
44.1k 48k
NOTE
96k cannot be selected if FORMAT is set to MP3.
8 Press the  button to show settings.
9 Use the + or – button to select
press the ¯ or Á button.
, and
SAMPLE
,
96k
, and
SIZE