Recording - Tascam DR-05 Owner's Manual

Recording

Before starting the following operation procedures,
level adjustment should be completed, and the
Home Screen should be open.
º
1 Press RECORD [ ] button to begin recording
standby.
The screen shows the recording file name, the
input source, the recording audio file type and
sampling frequency. Please confirm that these
are as desired before starting recording.
NOTE
If you have set the MONITOR MIX Screen's INPUT item
to ON so that you can always monitor the input, a pop-up
appears that allows you to turn overdubbing ON or OFF. For
ordinary recording, select OFF and continue to step 2.
2 To start recording, press the RECORD [
button again.
When recording starts, the REC indicator lights
continuously, and the display shows the elapsed
recording time and the remaining recording
time.
3 Press the (HOME) [
recording and create the audio file.
To pause recording, press the RECORD
º
[ ] button. Press the RECORD [
again to restart recording in the same track.
If you press the
after pausing a recorded audio file up to
the moment that you paused recording is
created.
NOTE
To avoid accidental recording of the noise from pressing the
4–Recording
º
]
ª
] button to end
º
] button
ª
(HOME) [ ]button
TASCAM DR-05
43