Start-Up & Shutdown; Starting Up The Unit - Tascam DR-05 Owner's Manual

Linear pcm recorder
Hide thumbs Also See for DR-05:
Table of Contents

Advertisement

3–Preparation
Start-up & shutdown
CAUTION
The unit goes in standby mode if shut down when the
unit is operating on AC power supplied through the AC
adapter (TASCAM PS-P515U, sold separately), or bus
power supplied from a USB port of a PC.
Turn down the volume of the sound system connected to
the unit before starting up or shutting down the unit.
Do not use headphones when starting up or shutting
down the unit. Otherwise, a large noise would cause
damage to headphones or your ears.

Starting up the unit

To start up the unit from the stopped state, press
(HOME) [ª] button until
and hold the
(start-up screen) is displayed on
TASCAM DR-05
the display. The Home Screen appears when the
unit starts up.
36
TASCAM DR-05
Start -Up Screen
Home Screen
CAUTION
When the unit is started up for the first time (or when
the built-in clock is reset after being left unused without
batteries), the DATE/TIME screen appears before the start-up
screen to adjust the date and time.
Press the  or ¯ button to move the cursor
(highlighted area), and use the + or - button to change

Advertisement

Table of Contents
loading

Table of Contents