Mode Settings - Panasonic U-72MF2U9 Service Manual

12. Mode Settings

6. Mode Settings

Setting mode 1
<Operating procedure>
1 Press and hold the
(Ventilation) button simultaneously for 4
seconds or longer.
2 Press the temperature setting
buttons to change the item code. The item codes
and setting data are shown in the table below.
3 Press the timer time
change the setting data.
To confirm the changed setting data, press the
1
button.
(At this time, "
and remains lit.)
4 During this mode, "
blinking. The outdoor unit address display section
2
displays "ALL," the item code and number (DN
value in the table), and the setting data (6 digits).
(The setting data is displayed in 6 digits. The
display changes between the first 3 digits (Fig. A )
and the last 3 digits (Fig. B
3
When the first 3 digits are displayed, the bottom dot
of the colon is illuminated.)
5 To exit the setting mode, press the
button.
4
5
Regarding the parameter setting, see the item "14. Detailed Settings in EEPROM of Outdoor Unit" under
the Section 1.
6
7
8
9
(Check) button and
and
and buttons to
" display stops blinking
" is displayed,
).
(Check)
Outdoor Unit Maintenance Remote Controller
Outdoor Unit Maintenance Remote Controller
A Display of fi rst 3 digits
2
A
3 5
B Display of last 3 digits
2
A
3 5
A and B are displayed alternately.
(Example shows display of 000 001.)
3 - 24
3WAY VRF SYSTEM
2WAY SYSTEM
1
1