Sewing; Manual Sewing - Pfaff 333-712/02 Instruction Manual

Sewing

10 Sewing
In the sewing mode, all relevant settings for the sewing operation are shown on the display
and can be altered directly. Functions can be switched on or off by pressing a key.
In this mode a difference is made between manual sewing and programmed sewing. To
change from manual to programmed sewing, press the PM key. In programmed sewing the
text "PM" appears on the display.
10

Manual sewing

.01
After switching on the machine and pressing the TE/Speed key, the max. speed can be set
with the corresponding +/- key.
Functions in manual sewing, also see Chapter 1.02 Function keys in the separate
instruction manual for the control panel.
●
30
(on machines with EcoDrive and control unit P40ED)
SPEED
1000
Needle position raised on/off
Thread trimming on/off
Start backtacks on/off
Sewing is carried out with the pedal functions, see Chapter
In manual sewing please note that the start backtacks function is switched on
and three start stitches are set for parameter 470.
For these start stitches the function for releasing the thread tension at intervals
is switched off.
When setting the start backtacks, seam segment "A" should be set at "0" and
seam segment "B" at 3.
7.02 Pedal.