Winding The Bobbin Thread, Adjusting The Thread Tension - Pfaff 333-712/02 Instruction Manual

9

Winding the bobbin thread, adjusting the thread tension

.02
5
3
Fig. 9 -02
● Place an empty bobbin
● Thread the bobbin in accordance with Fig.
1 a few times.
● Switch on the bobbin winder while at the same time pressing bobbin winder spindle
and lever 3.
● The tension of the thread on bobbin
● The bobbin winder stops automatically when bobbin
● Remove the f lled bobbin
1
2
1 onto bobbin shaft 2.
The bobbin fills up during sewing.
1 and cut the thread on knife 5.
If the thread is wound unevenly, loosen nut 6 and turn thread guide 7 accordin-
gly. Retighten nut 6 after the adjustment.
6
9-02 and wind it anti-clockwise around bobbin
1 can be adjusted with knurled screw 4.
1 is full.
Setting up
7
2
25