Installation And Commissioning; Installation; Adjusting The Table-Top Height - Pfaff 333-712/02 Instruction Manual

Hide thumbs Also See for 333-712/02:

Table of Contents

Installation and commissioning

.01

The site where the machine is installed must be provided with suitable connections for the

electric current, see Chapter 3 Specif cations.

It must also be ensured that the standing surface of the machine site is f rm and horizontal,

and that suff cient lighting is provided.

.01.01

●

The machine must only be mounted and commissioned by qualif ed personnel!

All relevant safety regulations are to be observed!

If the machine is delivered without a table, it must be ensured that the frame

and the table top which you intend to use can hold the weight of the machine

and the motor. It must be ensured that the supporting structure is suff ciently

sturdy, including during all sewing operations.

The method of packaging used requires that the table top be lowered for trans-

port. The following is a description of how to adjust the height of the table top.

Fig. 8 - 01

Loosen screws

1 and 2 and set the desired table-top height

Tighten screws

1 well.

Adjust the position of the pedal so that you can operate it comfortably and tighten screw

Table of Contents