Setting up
9
Setting up
9
Inserting the needle
.01
24
All instructions and regulations in this instruction manual must be observed.
Special attention must be given to all safety regulations!
All setting-up work must only be done by personnel with the necessary train-
ing. For all setting-up work the machine must be isolated from its power supply
by turning off the on/off switch or removing the machine plug from the electric
power socket!
Fig. 9 - 01
1
●
Raise needle bar.
●
Loosen screw
til you feel it stop. The long needle groo-
ve must be aligned in the direction of the
machine head.
●
Tighten screw
Switch the machine off!
Danger due to unintentional
starting of the machine!
Only use needles from the sys-
tem intended for the machine,
see Chapter 3 Specif cations.
1 and insert needle un-
1.