9
Setting the one-point tacking function
.07
(on machines with EcoDrive and control unit P40ED)
●
Switch on the machine.
●
Press the
The text "PM" must appear on the display.
●
Select the program number "
●
Press the
●
With the corresponding
●
By entering the value "
will take place.
2x
●
Press the
●
With the corresponding
●
With the corresponding
these start stitches the function for releasing the thread tension at intervals is switched
off.
●
Press the
2x
program appears on the display.
PM key to select the enter program function.
PM
1
1
1" with the corresponding +/- key.
scroll key.
PM
1000
1
+/- key, set the program with 1 seam segment.
0" with the corresponding +/- key, stipulate that no program linking
scroll key twice.
PM
1
1
+/- key, select the seam segment "1".
+/- key enter the value "3" for the number of start stitches. For
PM key twice to move to the beginning of the program. The previously created
20
0
3
Setting up
29