Programmed Sewing; Sewing With The One-Point Tacking Function - Pfaff 333-712/02 Instruction Manual

10

Programmed sewing

.02
On this machine, the programmed sewing function is only used for one-point tacking.
10

Sewing with the one-point tacking function

.03
After the machine has been switched on and the programmed sewing function has been se-
lected with the PM key, the display for selecting the program number, seam segment and
number of start stitches appears.
current
program number
● Sewing is carried out with the pedal functions, see Chapter
● When sewing begins, f rst of all the pre-selected start stitches are sewn
(see Chapter 9.07 Setting the one-point tacking function)
● The machine then stops.
● Each time the pedal is now operated, the machine sews one stitch.
1
current seam
segment
3
number of start
stitches
7.02 Pedal.
Sewing
31