Setting TAM MONITOR
TAM MONITOR allows you to screen all incoming calls.
To use this feature, LINE MONITOR VOL (see p. 50) must be set to a setting other than 0. If LINE MONITOR VOL is set to
0, you will not be able to hear any incoming messages as they are being recorded.
1
Press [Function], then press [Start/Copy].
2
Use [
] or [
3
Use [
] or [
4
Use [
] or [
5
Press [Stop].
Setting ends and the fax returns to standby mode.
Setting TOLL SAVER
Setting TOLL SAVER allows you to check whether you have any new messages when you call from a remote
location.
1
Press [Function], then press [Start/Copy].
2
Use [
] or [
3
Use [
] or [
• When TOLL SAVER is set to ON and there are telephone messages, the fax will ring twice before answering the call.
• When TOLL SAVER is set to ON and there are no telephone messages, the fax will ring five times before answering the call.
4
Press [Stop].
Setting ends and the fax returns to standby mode.
42
] to select TAM SETTINGS, then press [Start/Copy].
] to select TAM MONITOR, then press [Start/Copy].
] to select ON, then press [Start/Copy].
] to select TAM SETTINGS, then press [Start/Copy].
] to select TOLL SAVER, then press [Start/Copy] twice.
OFF