Installing The Bj Cartridge In Your Fax - Canon FAX-B840 User Manual

• The ink in the BJ cartridge is difficult to clean up if spilled. Follow the precautions below when handling the BJ
cartridge.
– Carefully remove packaging from BJ cartridges.
– Do not attempt to disassemble or refill BJ cartridges.
– Do not shake or drop BJ cartridges.
• Replace BJ cartridges after one year of use.
If you need to unplug the fax, wait until it returns to standby mode (time and receive mode displayed on the LCD). Otherwise
the cartridge holder may not be in its home position; causing the BJ cartridge to remain uncapped and dry out.
• Store BJ cartridges out of the reach of children. If a child
inadvertently ingests ink, consult a physician immediately.
• Do not touch the precision components on the BJ cartridge.

Installing the BJ cartridge in your fax

When there is no BJ cartridge installed in your fax, PUT IN CARTRIDGE is displayed on the LCD.
1 Make sure the fax is plugged in.
2 Load the paper in the multi-purpose tray.
3 Open the printer cover by gently pulling it towards
you (see p. 6).
4 Raise the cartridge lock lever on the cartridge holder.
5 Remove the BJ cartridge from its package, then
remove the orange protective cap a and tape b.
Discard the cap and tape. Never attempt to reattach them to the BJ
cartridge print head.
Do not touch these metallic areas.
1
2
1
11