Online Status - Draytek Vigor 2110 Series User Manual

3. Check if WAN IP Network Settings are set properly. If you select Specify an IP
address, you have to type in the values of IP Address and Subnet Mask manually. Be
sure the values that you type identify with the values from your ISP.
2 . 5 O n l i n e S t
2 . 5 O n l i n e S t
The online status shows the system status, WAN status, ADSL Information and other status
related to this router within one page. If you select PPPoE/PPPoA as the protocol, you will
find out a link of Dial PPPoE or Drop PPPoE in the Online Status web page.
Online status for DHCP
Detailed explanation is shown below:
Primary DNS
Secondary DNS
LAN Status
IP Address
TX Packets
RX Packets
WAN Status
Line
Name
Mode
Up Time
IP
GW IP
TX Packets
TX Rate
RX Packets
RX Rate
Note: The words in green mean that the WAN connection of that interface is ready for
accessing Internet; the words in red mean that the WAN connection of that interface is not
ready for accessing Internet.
a t u s
a t u s
Displays the IP address of the primary DNS.
Displays the IP address of the secondary DNS.
Displays the IP address of the LAN interface.
Displays the total transmitted packets at the LAN interface.
Displays the total number of received packets at the LAN interface.
Displays the physical connection (Ethernet) of this interface.
Displays the name set in WAN1/WAN web page.
Displays the type of WAN connection (e.g., PPPoE).
Displays the total uptime of the interface.
Displays the IP address of the WAN interface.
Displays the IP address of the default gateway.
Displays the total transmitted packets at the WAN interface.
Displays the speed of transmitted octets at the WAN interface.
Displays the total number of received packets at the WAN interface.
Displays the speed of received octets at the WAN interface.
20 Vigor2110 Series User's Guide