Filter Setup - Draytek Vigor 2110 Series User Manual

Some on-line games (for example: Half Life) will use lots of fragmented UDP packets to
transfer game data. Instinctively as a secure firewall, Vigor router will reject these fragmented
packets to prevent attack unless you enable "Accept large incoming fragmented UDP or
ICMP Packets". By checking this box, you can play these kinds of on-line games. If security
concern is in higher priority, you cannot enable "Accept large incoming fragmented UDP or
ICMP Packets".
4 . 5 . 3 F i l t e r S e t u
4 . 5 . 3 F i l t e r S e t u
Click Firewall and click Filter Setup to open the setup page.
To edit or add a filter, click on the set number to edit the individual set. The following page
will be shown. Each filter set contains up to 7 rules. Click on the rule number button to edit
each rule. Check Active to enable the rule.
Filter Rule
Active
Comment
Move Up/Down
Next Filter Set
p
p
Click a button numbered (1 ~ 7) to edit the filter rule. Click the button
will open Edit Filter Rule web page. For the detailed information,
refer to the following page.
Enable or disable the filter rule.
Enter filter set comments/description. Maximum length is
23–character long.
Use Up or Down link to move the order of the filter rules.
Set the link to the next filter set to be executed after the current filter
run. Do not make a loop with many filter sets.
96 Vigor2110 Series User's Guide