Trouble Shooting; Checking If The Hardware Status Is Ok Or Not; Checking If The Network Connection Settings On Your Computer Is Ok Or Not - Draytek Vigor2925 Series Quick Start Manual

4 . T
4 . T
This section will guide you to solve abnormal situations if you cannot access
into the Internet after installing the router and finishing the web
configuration. Please follow sections below to check your basic installation
status stage by stage.
If all above stages are done and the router still cannot run normally, it is the
time for you to contact your dealer for advanced help.
4 . 1
4 . 1
Follow the steps below to verify the hardware status.
1. Check the power line and LAN cable connections. Refer to "2.1
2. Turn on the router. Make sure the ACT LED blink once per second and
3. If not, it means that there is something wrong with the hardware status.
Downloaded from www.Manualslib.com
r o u b l e S h o o t
r o u b l e S h o o

Checking if the hardware status is OK or not.

Checking if the network connection settings on your computer are OK or
not.
Pinging the router from your computer.
Checking if the ISP settings are OK or not.
Backing to factory default setting if necessary.
C h e c k i n g I f t h e
C h e c k i n g I f t h
Hardware Installation" for details.
the correspondent LAN LED is bright.
Simply back to "2.1 Hardware Installation" to execute the hardware
installation again. And then, try again.
manuals search engine
i n g
t i n g
H a r d w a r e S t
e H a r d w a r e S t
33
a t u s I s O K o r N
a t u s I s O K o r N
Vigor2925 Series Quick Start Guide
o t
o t