Draytek Vigor 2110 Series User Manual page 108

Web Content Filter
SysLog
Advance Setting
web page first. For troubleshooting needs, you can specify to record
information for URL Content Filter by checking the Log box. It
will be sent to Syslog server. Please refer to section 3.12.5
Syslog/Mail Alert for more detailed information.
Select one of the Web Content Filter profile settings (created in
CSM>> Web Content Filter) for applying with this router. Please
set at least one profile for anti-virus in CSM>> Web Content Filter
web page first. For troubleshooting needs, you can specify to record
information for Web Content Filter by checking the Log box. It
will be sent to Syslog server. Please refer to section 3.12.5
Syslog/Mail Alert for more detailed information.
For troubleshooting needs you can specify the filter log and/or CSM
log here. Check the corresponding box to enable the log function.
Then, the filter log and/or CSM log will be shown on Draytek Syslog
window.
Click Edit to open the following window. However, it is
strongly recommended to use the default settings here.
Codepage - This function is used to compare the characters
among different languages. Choose correct codepage can help
the system obtaining correct ASCII after decoding data from
URL and enhance the correctness of URL Content Filter. The
default value for this setting is ANSI 1252 Latin I. If you do not
choose any codepage, no decoding job of URL will be processed.
Please use the drop-down list to choose a codepage.
If you do not have any idea of choosing suitable codepage,
please open Syslog. From Codepage Information of Setup dialog,
you will see the recommended codepage listed on the dialog box.
100 Vigor2110 Series User's Guide