How To Operate; Floor/Carpet Cleaning; Above Floor Cleaning - Dirt Devil M140000 Owner's Manual

HOW TO OPERATE

CORD RELEASE
1.
Turn Quick Cord
Release for easy cord
removal. Store cord
in cord guide (see
Features - pg. 5) to
keep out of the way
while vacuuming.
CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner
is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is
on.
Cleaner must be in the upright position to lift the rotation brush off the carpet when cleaning above the floor.
ON/OFF PEDAL HANDLE RELEASE
PEDAL
3.
4.
Plug cord into electrical outlet. To release handle, push the
Turn cleaner on by depressing handle release pedal located
foot pedal located on the back on the lower left side of the
left side of the cleaner. cleaner.

ABOVE FLOOR CLEANING

1.
2.
Remove the hose from the
Cleaner must be in its upright
tool caddy.
position to raise brushroll.
HEIGHT ADJUST LEVER
2.
Turn the
adjustment knob to
match the surface being
cleaned. IMPORTANT:
For easiest adjustment,
place cleaner in full
upright position.
FLOOR/CARPET
CLEANING
1.
Move
handle
a
b
adjust it to the
desired position
for (a) storing
the upright, (b)
c
operating
cleaner, and (c)
de-press
handle release
pedal again to clean under furniture. NOTE:
Rotating brush could cause area rug fringe to
become tangled within cleaner. Use caution when
vacuuming throw rugs with fringe.
3.
Choose
of the handy
a c c e s s o r i e s
or use
hose
Simply
the attachment
firmly
the end of the
wand or hose handle. To remove tool, twist
and pull apart gently.
7
height
the
and
the
the
any
the
alone.
push
onto