Dirt Devil SD40010 - Vacuum Cleaner Manual

FEATURES

1. Carry Handle
2. On/Off Switch
3. Cord Rewind
4. Dirt Container Release Button
5. Filter Door
6. Wheel
7. Hose

8. Floor Nozzle
9. Handle Grip
10. Extension Wand
11. Pet Upholstery Tool*
12. Crevice Tool*
13. Pet Turbo Tool*
14. Tool Storage

15. Pet Tool Adapter*
16. Wand Storage Clip 17.Clog Indicator Light
    *must first connect pet tool adapter to hose when using pet tools.
    *In Select Models Only

CORD RELEASE / REWIND

CORD RELEASE

1. To release cord, pull outward from storage location. Do not pull out past the red tape.
   

CORD REWIND

1. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
   

ATTACHMENTS

TO REDUCE THE RISK OF INJURY - UNPLUG CLEANER BEFORE REMOVING OR INSTALLING HOSE.

HOSE INSTALLATION AND REMOVAL

1. Hold hose and match tabs to align with slot inlets of canister.
   
   
2. Insert hose. Push firmly until hose locks into place.
   

ATTACHMENT INSTALLATION

1. Choose any of the handy accessories to meet your various cleaning needs. Then simply push it firmly o nto the hose or wand end.
   

ATTACHMENT INSTALLATION AND REMOVAL

1. The hose can be used alone or with many combinations of wands and tools.
2. To store attachments on the unit, simply lock them into the tool storage area located beneath the handle grip.
3. To remove the tool, pull apart gently. To unlock the wand, rotate and then pull apart.
   NOTE: Please follow these instructions for attaching all other accessories.

HOW TO OPERATE

ON/OFF SWITCH OPTIONS

1. Plug power cord into outlet.
   
   
2. Attach hose and desired attachment.
3. Turn power on (ON/OFF switch located on canister body).
   NOTE: For cleaning drapes, throw rugs, or other loose items, you may need to reduce the suction to prevent sucking the item into the cleaning tool. To reduce suction, adjust speed control located on canister body.

CLOG INDICATOR LIGHT

1. When red clog indicator light illuminates, turn unit off and clear clog to maintain optimal performance.
   

DIRT CONTAINER & FILTER: REMOVAL & REPLACEMENT

TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG CLEANER BEFORE SERVICING.

For F45 filter replacement, please call 1-800-321-1134 or visit our website at www.dirtdevil.com to locate a dealer nearest you.

DIRT CONTAINER REMOVAL

1. Grasp handle and press button with thumb (Diagram 1). Lift the dirt container up and out. while holding handle and pressing button (Diagram 1a).
   

EMPTY DIRT CONTAINER

1. Hold dirt container over wastebasket and press dirt container empty button on bottom of dirt container.
   

REMOVE FILTERS

1. Grasp filter tab (Diagram 1) and pull out of dirt container.
   NOTE: For best results, tap filter against wastebasket to remove remaining dirt.
   
   
   1. Remove secondary filter by pushing down on the filter door tab and pulling away from the cleaner.
      

CLEAN FILTERS

2. Tap the filter on the inside of a rubbish bin to remove excess dust and dirt from filter. Hold filter under running water to rinse. DO NOT use soap/detergent. Tap excess water out of filter. Allow filter to COMPLETELY DRY for at least 24 hours.
   

REPLACE FILTERS

3. Attach filter assembly to dirt container by pushing forward until it locks into place. Close lid on the canister.
   
   
4. Replace dirt container by pushing downward until it locks into place.
   
   
5. Replace secondary filter and close filter door.
   

TURBO TOOL: CLOG REMOVAL

TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG VACUUM BEFORE SERVICING.

1. With unit turned off, remove turbo tool* by pulling it off the end of the extension wand.
   
   *In Select Models Only
2. Remove ring on turbo tool (Diagram 2), pull open and remove clog (Diagram 2a). Snap back into place when finished and replace ring.
   

STORAGE

BEFORE STORING CLEANER:

1. Turn unit off.
2. Unplug and press automatic cord rewind button.
3. Place tools in tool storage located under handle grip.
4. Collapse extension wands and place them into the storage wand clip.

TROUBLESHOOTING GUIDE

ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE CUSTOMER SERVICE (1-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royal transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized Royal number and manufacturing code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner.)