Belt Or Brushroll: Removal & Replacement - Dirt Devil M140000 Owner's Manual

BELT OR BRUSHROLL: REMOVAL & REPLACEMENT
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG CLEANER BEFORE CHANGING BELT
OR BRUSHROLL.
BELT STYLE
22
For Belt Style 22 replacement, please visit our website at www.dirtdevil.com to
buy online or call customer service at 1-800-321-1134.
TO REMOVE BELT
1.
Lay cleaner flat and flip cleaner to expose Pull and lift nozzle guard off.
nozzle base. Base should lay flat and face
up. To remove nozzle guard, use Phillips
screwdriver to remove the three (3)
screws. Arrows show location of screws.
TO REPLACE BELT OR BRUSHROLL
4. 5.
MOTOR SHAFT
Place new belt in area of
Slide belt onto motorshaft.
brushroll without bristles.
7. 8.
Reattach nozzle guard. Secure by aligning the three
(3) tabs in the base slots.
2.
3.
Lift and remove brushroll.
Dispose of old belt.
6.
With
belt in place,
pull and slide
brushroll
nozzle making
sure that the
brushroll end
caps are in the
6a.
correct orientation
(6a inset). Rotate
brushroll manually to make sure belt is properly
aligned.
9.
SLOTS
TABS
Replace all three (3) screws
to secure nozzle guard.
10
new
into