How To Operate; Floor/Carpet Cleaning; Above Floor Cleaning - Dirt Devil M086035 Owner's Manual

HOW TO OPERATE
WARNING: FULLY ASSEMBLE BEFORE OPERATING.
NOTE: Cleaner must be in the upright position to lift the rotating brush off the carpet when cleaning above the
floor.
CARPET SETTINGS
1.
NOTE: The cleaner may be in the upright or operating position to adjust carpet setting.
ADJUSTING IN THE UPRIGHT POSITION: Rotate the knob to the desired setting.
NOTE: The knob will rotate easily. Once the carpet setting is selected, and the cleaner
placed in the operating position, the setting will be in the correct position.
ADJUSTING IN THE OPERATING POSITION: Rotate the knob to the desired setting.
NOTE: The knob will rotate with some resistance. The nozzle will raise and lower as the
knob is rotated.
CARPET CLEANING
2.
Plug cord into electrical
outlet. Turn cleaner "ON".
Power Pedal located on lower
left side of back of unit.
ABOVE FLOOR CLEANING
1.
Put cleaner in its upright
position. Remove the hose
from the side of the cleaner
by pulling out the hose grip.
NOTE: A slight twisting
motion may help.
CORD RETRACT
1.
Press the automatic cord
rewind lever to draw in the
power cord. NOTE: Hold
onto the power cord to pre-
vent the cord from whipping
during the automatic cord
rewind.
3.
With foot, depress the
handle release pedal on
back, left side of the cleaning
nozzle. NOTE: Rotating brush
could cause area rug fringe
to become tangled within
cleaner. Use caution when
vacuuming throw rugs with
fringe.
2.
Choose any of the handy
accessories or use the hose
alone. Simply push the
attachment firmly onto the
end of the wand or hose grip.
To remove tool, twist and pull
apart gently.
7