Belt Or Brushroll: Removal & Replacement - Dirt Devil vacuum cleaner Owner's Manual

BELT OR BRUSHROLL: REMOVAL & REPLACEMENT
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
BELT STYLE
For Belt Style 12 replacements, please call 1-800-321-1134 or visit our website at
12
www.dirtdevil.com to locate a dealer nearest you.
TO REMOVE BELT
1.
Lay cleaner flat and flip cleaner to Lift nozzle guard off.
expose nozzle base. Base should lay
flat and face up. To remove nozzle
guard, use Phillips screwdriver to
remove the five (5) screws. Arrows
show location of screws.
TO REPLACE BELT OR BRUSHROLL
4.
MOTOR SHAFT Slide belt onto motorshaft.
6.
7.
END
CAP
6a.
With new belt in place, pull and
Reattach nozzle guard.
slide brushroll into nozzle making
sure that the brushroll end caps
are in the correct orientation (6a
inset). Rotate brushroll manually to
make sure belt is properly aligned.
2. 3.
Lift and remove brushroll.
Dispose of old belt.
5.
Place new belt in area
of brushroll without
bristles.
8.
Replace all five (5) screws to
secure nozzle guard.
10