Table of Contents
Advertisement
at the same time until the letters Pr that al-
ternate with code 01 are displayed on the
LCD display, indicating that "parameter
01"( Fig. 7.24 ) has been activated.
Fig. 7.23
Fig. 7.24
•
Scroll the various parameters using keys
or 13 until the letters Pr that alternate with
code 11 are displayed on the LCD display,
indicating that "parameter 11"( Fig. 7.25 )
has been activated.
COMMISSIONING
13
12
11
12
Fig. 7.25
•
Press keys
11 and 13 ( Fig. 7.23 ) at the
same time until the value of parameter 11
(10=60 seconds)
( Fig. 7.26 ) is displayed
on the LCD display .
Fig. 7.26
•
It is possible to modify parameter 11 by
00=0s to99=600s using keys 12 or 13
(each increase or reduction by a unit on
the display corresponds to 6 seconds).
•
By pressing key
11 ( Fig. 7.23 ) confi rma-
tion of the inserted value is obtained.
•
Press keys
11 and 12 ( Fig. 7.23 ) at the
same time to exit without changing the val-
ue (return to the parameters list Fig. 7.25 )
•
Press keys
11 - 12 - 13 ( Fig. 7.23 ) at the
same time for 10 seconds to exit the "pro-
gramming mode".
Programming using the REMOTE control
•
Press button
for more than 3 seconds to
enter in
mode ( Fig. 7.27 ).
- 59 -
Advertisement
Table of Contents
