Table of Contents
Advertisement
ing keys 11 - 12 - 13 ( Fig. 7.41 ) for 10 sec-
onds at the same time until the letters Pr
that alternate with code 01 are displayed
on the LCD display, indicating that "param-
eter 01"( Fig. 7.42 ) has been activated.
Fig. 7.41
Fig. 7.42
•
Scroll the various parameters using keys
12 or 13 until the letters Pr that alternate
with code 12 are displayed on the LCD
display, indicating that "parameter 12"
( Fig. 7.43 ) has been activated.
- 64 -
COMMISSIONING
13
12
11
Fig. 7.43
•
Press keys
11 and 13 ( Fig. 7.41 ) at the
same time until the value of parameter
12 (99=Activ A 18S - Activ A 25S - Activ A
30S) is displayed on the LCD display ( Fig.
7.44 ).
Fig. 7.44
• t is possible to modify parameter using
I
keys 12 or 13 ( Fig. 7.41 ) (Refer to Fig.
7.40 and determine the correct Value ap-
pertaining to the output required for the
central heating requirement.).
•
By pressing key
11 ( Fig. 7.41 ) confi rmation
of the inserted value is obtained.
•
Press keys
11 and 12 ( Fig. 7.41 ) at the
same time to exit without changing the val-
ue (return to the parameters list Fig. 7.43 )
•
Press keys
11 - 12 - 13 ( Fig. 7.41 ) at the
same time for 10 seconds to exit the "pro-
gramming mode".
Advertisement
Table of Contents
