Figure 6-30. Audio Clips Page - Garmin GTN 625 Installation Manual

TAWS AUDIO
Access the Audio Clips page, as shown in 
Figure 6-30, by touching the 'Audio Clips' key on
the Terrain Configuration page as shown in
Figure 6-28 or Figure 6-29. For TAWS-B, select
which message is heard for cautions and warnings.
The audio clips for HTAWS are not configurable.
The Audio Clips page for HTAWS is only used to
sample the audio clips.
Description Selections
"Don't Sink"
NCR Caution
"Too Low Terrain"
EDR Caution "Sink Rate"
PDA Caution "Too Low Terrain"
"Obstacle Ahead" x2
IOI Caution
"Caution Obstacle" x2
"Obstacle Ahead" x2
ROC Caution
"Caution Obstacle" x2
"Terrain Ahead" x2
ITI Caution
"Caution Terrain" x2
"Terrain Ahead" x2
RTC Caution
"Caution Terrain" x2
"Obstacle Ahead Pull Up" x2
IOI Warning
"Obstacle" x2 "Pull Up" x2
"Obstacle Ahead Pull Up" x2
ROC Warning
"Obstacle" x2 "Pull Up" x2
"Terrain Ahead Pull Up" x2
ITI Warning
"Terrain" x2 "Pull Up" x2
"Terrain Ahead Pull Up" x2
RTC Warning
"Terrain" x2 "Pull Up" x2
EDR Warning "Pull Up"
VCO Caution "Five Hundred"
AIRPORT CRITERIA
Configure airport criteria from the Terrain Configuration page, as shown in Figure 6-28 or Figure 6-29.
Touch 'Runway Surf' key to select the applicable runway surface type. The selections are Any, Hard Only,
Hard/Soft, and Water.
Enter the minimum runway length by touching the 'Min. Length' key using the keypad. The range is 0 to
25,000 ft.
GTN 625/635/650 TSO Installation Manual
Page 6-30

Figure 6-30. Audio Clips Page

190-01004-02
Rev. F