Audio Configuration Page; Traffic Configuration Page - Garmin GTN 625 Installation Manual

6.6.8

Audio Configuration Page

Access the Audio Configuration page, as shown in 
Figure 6-17, by touching the 'Audio' key on the
GTN Setup page. The Audio Configuration page
allows the adjustment of volume alerts. To adjust
the alert volume, press the left arrow to decrease
the volume and the right arrow to increase the
volume. The volume is displayed as a percentage
of maximum volume, with 0% being muted and
100% being max volume. The selected volume
level can be checked by selecting 'Test Sound' and
selecting one of the sounds as shown in
Figure 6-18. Touch the white triangle to the right
of the key to hear the test sound. There are three
selections available: Altitude, Terrain, and Test
Tone.
6.6.9

Traffic Configuration Page

Access the Traffic Configuration page, as shown in
Figure 6-19 by touching the 'Traffic' key on the GTN
Setup page.
If the GTN is installed with other traffic displays,
choose the appropriate symbol color (White or Cyan)
to maintain cockpit consistency. If the GTN is used to
control the traffic system, touch the 'GTN Control of
Traffic System'. If the GTN is used to control the
traffic system, touch the key and select 'Yes'. If a
separate display device is used to control the traffic
system, select 'No'. If the GTN is configured for a
GDL 88 interfaced with a TCAD system, the option to configure the GTN control of the TCAD system
will be available. If the GTN is used to control the traffic system, select 'Yes'. If a separate display device
is used to control the traffic system, select 'No'.
190-01004-02
Rev. F
Figure 6-17. Audio Configuration Page
Figure 6-18. Select Test Sound Page
Figure 6-19. Traffic Configuration Page
GTN 625/635/650 TSO Installation Manual
Page 6-19