General Description; Introduction - Garmin GTN 625 Installation Manual

1 GENERAL DESCRIPTION

1.1 Introduction

This manual is intended to provide physical, mechanical and electrical information for use in the planning
and design of an installation of the GTN units into an aircraft. It is not a substitute for an approved
airframe-specific maintenance manual, installation design drawing, or complete installation data package.
Attempting to install equipment by reference to this manual alone and without first planning or designing
an installation specific to your aircraft is not recommended. The content of this manual assumes use by
competent and qualified avionics engineering personnel and/or avionics installation specialists using
standard aviation maintenance practices in accordance with Title 14 of the Code of Federal Regulations
and other relevant accepted practices, and is not intended for use by individuals who lack the competencies
set forth above. Refer to Section 2, Limitations, for additional information and other considerations.
NOTE
Except where specifically noted, references made to GTN will equally apply to the
GTN 625, GTN 635, and GTN 650. All screen shots used in this document are current at
the time of publication. Screen shots are intended to provide visual reference only. All
information depicted in screen shots, including software file names, versions, and part
numbers, is subject to change and may not be up to date.
Model
GTN 625
GTN 635
GTN 650
190-01004-02
Rev. F
Table 1-1. GTN Units
Part Number
011-02254-00
011-02255-00
011-02256-00
011-02256-50
011-02256-A0
GTN 625/635/650 TSO Installation Manual

Color Comment
BLACK
BLACK
BLACK
GRAY
BLACK NVIS-B compatible
Page 1-1