Coaxial Cable Installation - Garmin GTN 625 Installation Manual
Hide thumbs
Also See for GTN 625:
- Pilot's manual (610 pages) ,
- Reference manual (102 pages) ,
- Cockpit reference manual (86 pages)
Table of Contents
Advertisement
4.9 Coaxial Cable Installation
Follow the steps below for installation of the coaxial cables:
1. Route the coaxial cable to the radio rack location keeping in mind the recommendations of
Section 3.5. Secure the cable in accordance with AC 43.13-1B Chapter 11, section 11.
2. Trim the coaxial cable to the desired length and install the TNC and BNC connectors per the
cabling instructions on Figure 4-1 below. If the connector is provided by the installer, follow the
connector manufacturer's instructions for cable preparation.
190-01004-02
Rev. F
Figure 4-1. Coaxial Cable Installation
GTN 625/635/650 TSO Installation Manual
Page 4-9
Advertisement
Table of Contents
