Disassembly (Fig. 17)
1. Park machine on a level surface, engage the parking
brake, lower the cutting units and stop the engine. Re-
move key from the ignition switch.
2. Remove grass basket from suspension assembly.
3. Remove cutting unit from suspension assembly (see
Traction Unit Operator's Manual).
4. Disassembly crossarm assembly as required using
Figure 17 as a guide.
NOTE: The flange head screws (item 13) used to se-
cure the basket horn (item 12) to the crossarm assembly
have a patch lock to prevent loosening of the screws. If
screws are removed, replace screws.
Greensmaster 3300/3400
Assembly (Fig. 17)
1. Assemble crossarm assembly using Figure 17 as a
guide.
2. Install cutting unit to suspension assembly (see
Traction Unit Operator's Manual).
3. Install grass basket.
Page 7 - - 21
Chassis