Safety Features; Safety Lock / System Lock - Miele KM 6388 Operating And Installation Instructions

Safety features

Safety lock / System lock

The system lock and safety lock are
deactivated if there is an interruption
to the power supply.
Three-finger control is the default set‐
ting. You can change the default to
one-finger control (see "Program‐
ming").
Your cooktop is equipped with a sys‐
tem lock and a safety lock to prevent
the cooktop and the cooking zones be‐
ing switched on or any settings being
altered.
The system lock is activated when the
cooktop is switched off. When it is acti‐
vated, the cooktop cannot be switched
on and the timer cannot be used. The
cooktop is programmed so that the
system lock must be activated manual‐
ly. It can be programmed to be activa‐
ted automatically 5 minutes after the
cooktop has been switched off if the
system lock is not manually activated
first (see "Programming").
36
The safety lock is set when the cook‐
top is switched on. When the safety
lock is activated:
– The power settings for the cooking
zones and the timer settings cannot
be changed.
– The cooking zones, entire cooktop
and the timer can be switched off,
but once switched off cannot be
switched on again.
If a locked sensor is touched when the
safety lock or the system lock is activa‐
ted, the indicator light comes on and 
appears in the timer display for a few
seconds.
Activating
 Touch the  sensor and the  sensor
of both right cooking zones until 
appears in the timer display and the
safety lock indicator light comes on.
The indicator light and  go out after
a short while.
Deactivating
 Touch the  sensor and the  sensor
of both right cooking zones until the
 goes out in the timer display and
the safety lock indicator light goes
out.