You can programme certain settings on
the cooktop to suit your personal
needs. Several settings can be changed
in succession.
After starting the programming function,
(programme) and an (status) will ap‐
pear in the timer display. With cooktops
that have 3 cooking zones, an addition‐
al display appears at the back left.
The programme is displayed in the front
left and rear left cooking zone displays.
Example:
Programme 3 =
front left , rear left
Programme 14 = front left , rear left
The status is displayed in the front right
control panel
After the programming function is exi‐
ted, an automatic reset is performed.
It is concluded when an indicator light
lights up briefly above the sensor.
Do not turn the cooking zone on until
the reset is concluded.
Calling up programming
With the cooktop switched off,
touch the and sensors at the
same time until the indicator light for
the safety lock flashes.
Setting a programme
To set the unit digits, touch the re‐
quired number on the front left con‐
trol panel.
To set the tens digits, touch the re‐
quired number on the rear left con‐
trol panel.
Setting the status
Touch the required number on the
front right control panel.
How to save the settings
Touch the sensor until the displays
go out.
How to avoid saving the set‐
tings
Touch the sensor until the displays
go out.
Programming
41