The cooktop has to be switched on if
you wish to use the timer.
You can set a time between 1 mi‐
nute () and 9 hours (.).
The timer can be used for two different
functions:
– To set the minute minder.
– To set a cooking zone to switch off
automatically.
A time up to 99 minutes can be set and
displayed in minutes.
To set a time of more than 99 minutes,
the timer must be switched to hours (h).
The time is set in half-hour steps. Half-
hours are indicated by a dot following
the number, for example, 2 h 30 min:
h
Minute minder
Setting the minutes
Example: You want to set a time of 15
minutes.
Make sure the cooktop is switched
on.
Touch the sensor.
The sensor flashes. appears in
the timer display, and the right flash‐
es.
First the tens digit is set then the units
digit.
Touch the number sensor which cor‐
responds to the tens position (1 in
this case).
The timer display will change and will
start flashing on the right-hand side.
Touch the number sensor which cor‐
responds to the units position (5 in
this case).
The timer display will change. The
moves to the left and appears on the
right.
After several seconds, the sensor
and the timer display will light up con‐
stantly. The timer starts to count down.
Timer
31