Miele KM 6388 Operating And Installation Instructions page 47

Problem
 alternating with a
number flashes in the
timer display.
Possible cause and remedy
The overheating protection mechanism has been acti‐
vated.
 See "Overheating protection".
 or 
The fan is blocked or defective.
 Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
 If this fault message continues to appear in the
display, contact Miele.
 and other numbers
There is a fault in the electronic module.
 Interrupt the power supply to the cooktop for ap‐
prox. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
Problem solving guide
47