Table of Contents
Advertisement
Timer
The SmartLine element has to be
switched on if you wish to use the
timer.
The timer can be used for the following
2 functions:
- For setting the minute minder
- For automatically switching off a
cooking zone/heater element/Tepan
Yaki zone
You can use the functions
simultaneously.
A duration of between 1 minute (:)
and 9 hours 59 minutes (:) can be
set.
Durations of up to 59 minutes are
shown in minutes (0:59) and durations
of more than 60 minutes are shown in
hours and minutes. Durations are
entered in the order of hours, followed
by minutes in tens and then units.
Example:
59 minutes = 0:59 hours,
Enter: 5-9
80 minutes = 1:20 hours,
Enter: 1-2-0
After the first number has been entered,
the timer display will light up constantly.
After the second number has been
entered, the first number will move to
the left. After the third number has been
entered, the first and second numbers
will move to the left.
26
Minute minder
The minute minder is set using the
numerical display for the left or front left
cooking zone (depending on model).
Setting the minute minder
Touch the sensor control.
The timer display flashes.
Set the required duration.
Touch the sensor control or wait
10 seconds to start the minute minder.
Changing the minute minder duration
Touch the sensor control.
The timer display flashes.
Set the required duration.
Deleting the minute minder duration
Touch the sensor control.
Touch the on the numerical display.
Advertisement
Table of Contents
