Operation; Daily Inspection - Ransomes Mastiff 91 Safety, Operation & Maintenance Manual

6 OPERATION

6.1 DAILY INSPECTION _____________________________________________________

1. Perform a visual inspection of the entire unit, look for signs of wear, loose hardware and missing or
damaged components. Check for fuel and oil leaks to ensure connections are tight and hoses and
tubes are in good condition.
2. Check the fuel supply, radiator coolant level, crankcase oil level and air cleaner is clean. All fluids must
be at the full mark with the engine cold.
3. Make sure the cutting unit is adjusted correctly.
4. Test the operator presence and safety interlock system.
en-20
CAUTION
THE DAILY INSPECTION SHOULD
BE PERFORMED ONLY WHEN
THE ENGINE IS OFF AND ALL
FLUIDS ARE COLD. LOWER
IMPLEMENTS TO THE GROUND,
ENGAGE PARKING BRAKE, STOP
ENGINE AND REMOVE IGNITION
KEY.