Heat & Glo SL-550TR-E Installation Manual page 64

A. Vent Components Diagrams (continued)
14 IN.
356 mm
Required Wire Harness
DESCRIPTION
10 FT PV Wire Harness
20 FT PV Wire Harness
40 FT PV Wire Harness
60 FT PV Wire Harness
80 FT PV Wire Harness
100 FT PV Wire Harness
Figure 12.7 PVLP-SLP Vent Components
Heat & Glo • SL-550/750TR-E, SL-550/750/950TR-IPI-E Installation Manual • 2118-910 Rev. C • 4/16
64
Top View
Front View
15-1/2 IN.
394 mm
8 IN.
203 mm
11-1/2 IN.
292 mm
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
PVLP-BEK
Brick Kit
6-1/4 IN.
159 mm
1-1/2 IN.
38 mm
Side View
4-3/8 IN.
10 IN.
112 mm
254 mm
Note: Wire harnesses required to power the PVLP-SLP
connect to the appliance and are ordered separately from
PVLP-SLP. Contact your dealer to order.
Note: The PVLP-SLP requires a PVLP-CK be installed
on this appliance. The PVLP-CK is ordered separately
from the PVLP-SLP. Contact your dealer to order.
Note: A PVLP-HS heat shield is available and sold
separately. Use if the PVLP-SLP is installed in a high traffi c
area.
PVLP-HS
Heat Shield
2-1/4 IN.
57 mm
4-3/4 IN.
121 mm
9-1/2 IN.
241 mm
5-1/4 IN.
135 mm
2-1/4 IN.
57 mm