Heat & Glo SL-550TR-E Installation Manual page 28

Rear Vent - Horizontal Termination
No Elbow
Note: Use DVP Series
components only.
H
1
SL-550TR-E 24 in.
SL-550TR-IPI-E
SL-750TR-E 24 in.
SL-750TR-IPI-E
SL-950TR-IPI-E 18 in.*
Figure 4.16
Rear Vent - Horizontal Termination
One 45º Elbow
For corner installation of models SL-550TR-E and SL-750TR-E ONLY
Note: Use DVP Series
components only.
Note: Do not use a 45º elbow for
SL-950TR-IPI-E. Use two 90º
elbows for corner installation on
SL-950TR-IPI-E.
Figure 4.17
Heat & Glo • SL-550/750TR-E, SL-550/750/950TR-IPI-E Installation Manual • 2118-910 Rev. C • 4/16
28
MAX
610 mm
610 mm
457 mm
CAUTION
*For SL-950TR-IPI-E ONLY:
H Maximum can be up to 24 inches ONLY if the Optional
1
Refractory Kit (BRICK-950TR-E) is NOT used.
H = 9 in. (229 mm) Maximum
1