Montigo PL38DF Installation & Maintenance Manual page 33

Remote-Flame Control
When you turn on the fireplace it starts on high. The proflame
2 has six (6) flame levels. Each time you press the Down Arrow
Key once the flame height will reduce by one step.
You can continue this until the main burner flame turns off. You
can still operate the optional accent lights and optional fans in
this mode.
If the main burner flame is off and you press the up arrow key
once, the flame will automatically go to high.
Figure 28f. Flame Off and Flame Level 1.
Figure 28g. Flame Level 5 and Flame Level Maximum.
XG0216 -160215.1
Operation
Room Thermostat (Remote Control
Operation)
The Remote Control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control
the comfort level in a room. To activate the function, press
the Thermostat Key, see Figure 28h. The LCD display on the
remote control will change to show that the room thermostat
is "On" and the set temperature is now displayed. To adjust
the set temperature press the Up or Down Arrow Keys until the
desired set temperature is displayed on the LCD screen of the
Transmitter.
Figure 28h. Setting Room Thermostat
Smart Thermostat (Remote Control
Operation)
The Smart Thermostat function adjusts the flame height in
accordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature
gets closer to the set point the Smart Function will modulate the
flame down. To activate the function, press the Thermostat Key,
see Figure 28, until the word "SMART" appears to the right of the
temperature bulb graphic, see Figure 28i.
NOTE: When smart Thermostat is activated, manual flame height
adjustment is disabled.
Figure 28i. Smart flame function
PL38DF* Indoor Gas Fireplace
...............................
...............................
Page 33