Remote Operation - Montigo PL38DF Installation & Maintenance Manual

Remote Operation

The Proflame 2 System consists of the following elements:
1. Pilot Assembly
2. Proflame Gas Valve.
3. Proflame 2 Control Module
4. Wiring Harness
5. Variable Speed fans (OPTIONAL)
6. Proflame 2 remote control
7. Battery Pack
8. Manual override switch
NOTE: Can not be used with home automation systems.
The Proflame 2 Transmitter controls the following fireplace
functions:
1. Main Burner On/Off
2. Main Burner flame modulation (6 levels).
3. Choice of standing or intermittent pilot (CPI/IPI).
4. Thermostat and Smart thermostat functions.
5. Fan speed modulation (6 levels) (Optional).
The Proflame 2 Transmitter uses a streamlined design with a
simple button layout and informative LCD display. A Mode Key is
provided to index between the features and a Thermostat Key is
used to turn On/Off or index through Thermostat functions, see
Figure 28. Additionally, a Key Lock feature is provided.
WARNING
Do not expose remote control to temperatures below 0°C (32°F) or above 50°C (122°F)
CAUTION
Property Damage Hazard. Excessive heat can cause property damage.
The appliance can stay lit for many hours. Turn off the appliance if it is not going
be attended for any length of time.
XG0216 -160215.1
Operation
.
.
Figure 28.
SW1
LED1
LED2
SW1 = Programing Button
LED1 = Red Diagnostic Light
LED2 = Amber Programing Remote Control Light
Figure 28a. Proflame 2 Control Module
Fans
Figure 28b. Remote Control LCD Display
PL38DF* Indoor Gas Fireplace
Blue Back lit LCD display
On/Off Key
Thermostat Key
Up/Down Arrow Key
Mode Key
Not Used
Accent lights
Page 31