Montigo PL38DF Installation & Maintenance Manual page 28

PL38DF* Indoor Gas Fireplace
Installing Optional Driftwood Log Set
The PL38DF* has the option of installing a driftwood log set. Once
the firestones or speckled stones have been installed the log set
can be installed.
Ensure logs are securely placed and will not tip or fall. Remove media
where logs touch the burner tray to ensure a more secure position.
Lean the logs against the back panels. NO LOGS SHOULD LAY
ACROSS OR OVER TOP OF THE BURNER PORTS ON THE SURFACE
OF THE BURNER.
Step 1. Remove the glass door as described in Section
8. See Figure 25 - 25g.
Step 2. Ensure selected media is installed as described
above. See Figures 26 - 26f.
Step 3. Unpack the logs and handle with care.
3
1 2
Figure 27. LGS58
2 3
1
Figure 27a. LGS59
Step 4. Place Log 3 from LGS58 in the back right corner
of the burner tray. Ensure log does not cover ports. Place
Log 2 of LGS58 on top of log 3.See Figure 27b.
Page 28
Installation
4 5
4 5 6
Figure 27b.
Step 5. Place Log 5 from LGS58 on top of Log 2. Place
Log 1 from LGS58 on top of log 2, see Figure 27c
5
Figure 27c.
6 Pilot
Ports
Figure 27d.
Step 6. Place log 6 of LGS59 across of log 1 of LGS58,
see Figure 27e.
Ports
Figure 27e.
2
Ports
6
3
Ports
1
XG0216 - 160215.1