Button Inspection - Avaya M7100 User Manual

13. Button Programming
The programmable button on your phone can be assigned a range of functions.
There are a number of methods that you can use for button programming:
Button Inspect
· 68
See the function currently set on a button.
Auto Dial Button
·
Store a number to be dialed by the button when it is pressed.
User Button (Internal Auto Dial)
·
Store another user's extension number to be dialed when the button is pressed.
Feature Button
· 71
Set a button to invoke a Feature code.
Function Button
·
Set a button to invoke a selected telephone system function.
Default Buttons
·
You can return the function of certain buttons back to their default for this type of phone.
Erase a Button 69
·
You can use the auto dial programming process but with a number to erase the current programming of a button.
You system administrator can see and edit your button settings. They can also apply functions that you cannot program.
Note that button user templates can be applied which will lock the function of certain button even if you try to change
them.

13.1 Button Inspection

You can check the current function of the programmable button.
1. Press Feature *0.
2. The phone displays your extension number.
3. After a few seconds, or if you press the programmable button, the button's current function is displayed.
M7100 Telephone User Guide
IP Office
: Feature *0
70 : Feature *1
: Feature *2
70
: Feature *3
: Feature *3*
71
: Feature *3**
69
: Feature *1 Hold
Page 68
- Issue 02c (13 March 2014)