Tip 4-2. Inspect WATER DISPENSER DRIPPING
Check Point
Step 1
①
Disassemble the TOP TABLE
②
Inspect TUBE-FITTING HOSE
- SCRATCH / Less inserting
③
Inspect ASSY CASE FILTER WATER HOSE LINE
- HOSE SCRATCH / Less inserting
SCRATCH part
Connect again after CUTTING
※ WATER DRIPPING occurs as
WATER LINE AIR
Step 3
①
Inspect WATER TANK AIR
②
Dispense inner AIR with shaking CASE FILTER
left-right pushing WATER LEVER.
Step 4
①
When water comes after disassemble the
ASSY CASE-FILTER Water-TANK exit HOSE,
Water valve is failure.
Replace Water Valve
Step 5
①
Disassemble Water hose which is connected
to product.
②
Inspect the bubble occurrence in the water
when supply water into container.
-If the BUBBLE appear it is not the problem
of the product
Step 6
①
It is no problem that the ice melting from
ICE dispensing and flow to CASE DISPENSER.
- Customer explanation
Inspect WATER HOSE LINE LEAK
HOSE SCRATCH
BUBBLE
- 47/65 -