Tip 6-1. Inspect ICE ROUTE DEFROST BUILD
Step 1
①
Check ICE ROUTE frost with R-DOOR OPEN.
- If the frost only on ICE ROUTE, it is no
problem because ICE appears during
dispensing.
Step 2
( If it freezes until ICE BUCKET bottom)
①
Flash where is on R-DOOR OPEN ICE ROUTE
top to bottom and pour water and inspect
leakage
②
Water or light leak, it is leakage failure
③
Check assembly condition of COVER ICE
ROUTE and assemble it without swerving.
Step 3
(COVER ICE ROUTE S/W failure량)
①
When the COVER opens because of
operation failure
②
Inspect CONNECTOR OPEN
③
Inspect MOTOR S/W TOUCH failure
- Rotate continuously if the S/W 2 are not
pushed all.
④
Inspect BLUE / WHITE S/W changing
⑤
Replace ASSY CASE-LEVER DISP.
- 54/65 -
Assembly failure
Inspect
COLOR