Rule 1: The Code 128 Scanning Rule; Rule 2: The Upc Scanning Rule; Alternate Rule Sets - Symbol MiniScan MS-220X Integration Manual

MS-120X and MS-220X Integration Guide

Rule 1: The Code 128 Scanning Rule

Step Bar Code
1 Begin New Rule
2 Code 128
3 Send next 5 characters
4 Send <CTRL M>
5 Send next 5 characters
6 Send <CTRL P>
7 Send next 2 characters
8 Send <CTRL D>
9 Save Rule

Rule 2: The UPC Scanning Rule

Step Bar Code
1 Begin New Rule
2 UPC/EAN
3 Send all remaining data
4 Send <CTRL M>
5 Save Rule
If you make a mistake while entering this rule, scan the
page 13-10. If you already saved the rule, scan the
code on page 13-9.

Alternate Rule Sets

ADF rules can be grouped into one of four alternate sets which can be turned on and off
when needed. This is useful to format the same message in different ways. For example,
a Code 128 bar code contains the following information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
This bar code might look like:
245671243701500
13-4
On Page Beep Indication
13-8 High High
13-12 High High
13-24 High High
13-44 High High
13-24 High High
13-45 High High
13-24 High High
13-43 High High
13-9 High Low High Low
On Page Beep Indication
13-8 High High
13-13 High High
13-24 High High
13-44 High High
13-9 High Low High Low
Quit Entering Rules
Erase Previously Saved Rule
bar code on
bar