Rule 1: The Code 128 Scanning Rule; Rule 2: The Upc Scanning Rule; Alternate Rule Sets - Symbol DS 3478 Product Reference Manual

Rule 1: The Code 128 Scanning Rule

Step Scan Bar Code
1 Begin New Rule
2 Code 128
3 Send next 5 characters
4 Send <CTRL M>
5 Send next 5 characters
6 Send <CTRL P>
7 Send next 2 characters
8 Send <CTRL D>
9 Save Rule

Rule 2: The UPC Scanning Rule

Step Scan Bar Code
1 Begin New Rule
2 UPC/EAN
3 Send all remaining data
4 Send <CTRL M>
5 Save Rule
To correct any errors made while entering this rule, scan the
scan the Erase Previously Saved Rule

Alternate Rule Sets

If desired, group ADF rules into one of four alternate sets to turn on and off when needed. This is useful to format the same message
in different ways. For example, a Code 128 bar code contains the following information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
This bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily, data is sent as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)
But, when there is a sale, send only the following:
24 (class key)
56712437 (stock key)
On Page Beep Indication
15-8 High High
15-11 High High
15-27 High High
15-47 High High
15-27 High High
15-47 High High
15-26 High High
15-46 High High
15-8 High Low High Low
On Page Beep Indication
15-8 High High
15-12 High High
15-26 High High
15-47 High High
15-8 High Low High Low
Quit Entering Rules
bar code on page 15-9.
Advanced Data Formatting 15-5
bar code on page 15-9, or after saving the rule,