Prefix/Suffix Values - Symbol MiniScan MS-220X Integration Manual

MS-120X and MS-220X Integration Guide

Prefix/Suffix Values

Parameter # P = 69h, S1 = 68h, S2 = 6Ah
Note: This section only applies to setting prefix/suffix values for the
MS-1204 and MS-2204. To set prefix and suffix values for the
MS 1207 and MS-2207, use ADF programming (see Send Preset
Value on page 13-31.)
A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To
set these values, first scan one of the following bar codes, then scan a four-digit number
(i.e., four bar codes from
to the key codes for various terminals. These codes can be found in
To change the selection or cancel an incorrect entry, scan the
9-146.
Note: In order to use Prefix/Suffix values, first set the
Transmission Format
9-108
Numeric Bar Codes
(MS-XX04). See
beginning on page
Cancel
Scan Data
page 9-110.
9-144) that corresponds
Table A-1 on page
bar code on page
A-1.