Stop Bit Select; Data Bits - Symbol MiniScan MS-220X Integration Manual

MS-120X and MS-220X Integration Guide

Stop Bit Select

The stop bit(s) at the end of each transmitted character marks the end of transmission of
one character and prepares the receiving device for the next character in the serial data
stream. Select the number of stop bits (one or two) the host device is programmed to
accommodate.
*
1 Stop Bit
2 Stop Bits

Data Bits

This parameter allows the scanner to interface with devices requiring a 7-bit or 8-bit ASCII
protocol.
7-Bit
*
8-Bit
10-12