Rule 1: The Code 128 Scanning Rule; Rule 2: The Upc Scanning Rule; Alternate Rule Sets - Symbol DS6707 Product Reference Manual

Rule 1: The Code 128 Scanning Rule

Step Bar Code
1 Begin New Rule
2 Code 128
3 Send next 5 characters
4 Send <CTRL M>
5 Send next 5 characters
6 Send <CTRL P>
7 Send next 2 characters
8 Send <CTRL D>
9 Save Rule

Rule 2: The UPC Scanning Rule

Step Bar Code
1 Begin New Rule
2 UPC/EAN
3 Send all remaining data
4 Send <CTRL M>
5 Save Rule
To correct any errors made while entering this rule, scan the
is already saved, scan the

Alternate Rule Sets

ADF rules may be grouped into one of four alternate sets which can be turned on and off when needed. This is
useful to format the same message in different ways. For example, a Code 128 bar code contains the following
information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
The bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily, data is sent as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)
But, when there is a sale, send only the following:
24 (class key)
56712437 (stock key)
On Page
11-5
11-8
11-24
11-44
11-24
11-44
11-23
11-43
11-5
On Page
11-5
11-10
11-23
11-44
11-5
Erase Previously Saved Rule bar code on page
Advanced Data Formatting 11 - 3
Beep Indication
High High
High High
High High
High High
High High
High High
High High
High High
High Low High Low
Beep Indication
High High
High High
High High
High High
High Low High Low
Quit Entering Rules bar code on page
11-6.
11-6. If the rule